Saturday, December 14, 2019

Teaching Strategies Free Essays

The book â€Å"Dharma Punx† was written by Noah Levine, the son of bestselling author and Buddhist teacher Stephen Levine. As a writer, he uses a natural, conversational and empathic voice to narrate his story in order to reach out to others who have gone through the same ordeal as he did. This book, which was written in a very thorough narrative serves more or less as his autobiography, focusing primarily on what would probably the most turbulent moments of this life when drifted from one â€Å"movement† to another, from punk rock to drugs and alcohol which nearly sent his life crashing down to the point of self-destruction or suicide which he attempted several times, hence the title of the first chapter is â€Å"Suicide Solution† (Levine, 2003, p. We will write a custom essay sample on Teaching Strategies or any similar topic only for you Order Now 1). The starting point of Levine’s story was at the detention facility where he was confined and at the time, he was going through withdrawal symptoms as the adverse effects of drugs and alcohol were being flushed out of his system. It was at this point that he would begin to retell his tale on how he got into that situation. Born in 1971, his parents hailed from the â€Å"hippies† generation of the 1960’s where they revolted against the establishment at the height of the Vietnam War and one of their mantras was â€Å"Make Love, Not War!† as well as the overflowing freedom of expression of their generation that also indulged in free drugs and sexual promiscuity as well, thereby making the term â€Å"psychedelic† an understatement for their generation that turned to drugs as a way to escape a harsh, brutal and cynical reality they wanted to repudiate. They were trying to create their own brand of utopia but somehow, this would not be perfect as well, and this would be reflected in Levine’s own family.  In his childhood years in the late 1970s and early ’80s, Levine loved to skateboard but partly out of curiosity and influence, he got hooked into punk rock and often watched punk-rock concerts as well as looking the part of a punk rocker by the time he was in his teens. Punk rock was to his generation what the psychadelic â€Å"hippie† movement was to his parents. Levine said that the situation of his generation made them turn to this fad – like him, the youth of his generation had to cope with problems like broken homes, irresponsible parents who were either alcoholic or drug dependents; there was no responsible adult who could guide them. His parents had divorced by then and he would spend time with each of them, shuttling between their homes in California and New Mexico. Both his parents remarried but his mother’s second marriage was fraught with trouble and the irony of that was she met her second husband in a meditation retreat while his father was able to move on and remarry a woman whom he truly loved and gave him a happier marriage (Levine, 2003, p. 5). However, without his â€Å"enlightened† father around to guide him, the younger Levine was susceptible to the temptations of the materialistic world. By the time he was six years old, he already began smoking marijuana and was also trying out other banned substances as well like cocaine. This also came hand in hand in partaking of alcohol which would stay with him for most of his youth. He was so addicted into drugs and alcohol that by the time he was in high school, he had become very violent, often getting into trouble ranging from brawls to vandalism that he was arrested several times for such behavior, something he appeared to have welcomed, owing to his punk rock influence, his own way of defying authority. He eventually dropped out of school and lived like a vagrant, often stealing to support his habit (Levine, 2003, pp. 21-24). In his recent detention in 1988, the point where he was at his very low that his road to â€Å"enlightenment† would begin. When his father visited him, he was the one who had set him on the path by encouraging him to try meditation (Levine, 2003, pp. 3-4). At first, Levine regarded Buddhist teachings as â€Å"bullshit† but the moment he made an effort to try it, he underwent a profound transformation. He began the 12-step program and started attending meditation sessions. He was eventually released and he started on a new path in life. Over the next few years, Levine worked hard on his spiritual growth, even practicing celibacy and taking a pilgrimage to the Far East in search of enlightenment and even meeting and learning from the Dalai Lama himself! He would eventually finish his studies by getting a college degree but he did not stop there. He went further and obtained a graduate degree in counseling psychology as well. He followed in his father’s footsteps by also becoming a Buddhist teacher and of all the places where he would like to teach, he chose to be at the very same detention facility where he used to be remanded. Although he is a totally reformed and transformed individual, there is one thing from Levine’s past that he has not repudiated, his passion for punk rock. He still listens to punk rock, and still acts, looks and dresses the part. He still sports tattoos but the difference now is that his tattoos are Buddhist-inspired such as the lotus flower and Sanskrit inscriptions, making Levine a look-alike of Hollywood actor Vin Diesel famous for his role as agent â€Å"XXX† where he would also sport tattoos. One of the things Levine discovered about Buddhism is that it is very open-minded into tolerating anything that would compliment it. Buddhist teachings, particularly the Zen school of thought, say that if an individual can be one with that particular subject, that is also Buddhism. Levine himself will attest that punk rock, contrary to what conservative thinkers may think, is not anathema to society at all. This is, of course, looking at it from a Buddhist perspective. Other people tend to view punk rock as wild, violent and to a certain extent, destructive. As Levine would also admit, he turned to punk rock as a way of defying the status quo of his generation, much like his parents were part of the â€Å"hippie† movement as an expression of defiance of the status quo of their own generation as well (Levine, 2003, p.  34). The nice thing about Buddhism is that it has a way of channeling the excess energy away from the destructive path. If there was one other thing that Levine learned from his enlightenment, it is that death is not the answer to his problems when he was attempting to commit suicide. For most people, to take one’s life is the way of the loser, notwithstanding the â€Å"samurai† concept of suicide where they would take their own lives to erase the stigma of the shame. It does not apply here and this can be interpreted in several ways. From the Hindu/Buddhist perspective, there is the concept of â€Å"karma† and reincarnation where one’s conduct in the present life would have an influence on what will become of them in the next. While these beliefs recognize death (as a natural occurrence), it does not encourage people to commit suicide. Based on â€Å"karma,† the one who commits suicide might find himself or herself reincarnated in a much lower life form because of this and surely, no one would like to be reborn as an animal or a microscopic organism! In most beliefs, death is not the end, but rather the beginning of the next phase, provided it would be allowed to take its natural course. Committing suicide would disrupt the grand design for the individual in the universe. One notable aspect of Buddhist Dharma is the direction one’s path will be, depending on the choices made. Levine’s somewhat troubled past serve as the basis of his writings and teachings. â€Å"We all sort of have a different doorway to dharma or spiritual practice. Suffering is a doorway. For me it was the suffering of addiction, violence and crime which opened me at a young age, 17 years old. I was incarcerated, looking at the rest of my life in prison and thought, ‘Maybe I will try dad’s hippie meditation bullshit. ‘ Suffering opened me to the possibility of trying meditation. † (Levine, 2003, p. 246) All in all, â€Å"Dharma Punx† is not only an autobiography, it is a spiritual journey of one individual who has endured probably the worst life can throw at him, send him on the wrong direction but through corrective â€Å"enlightenment,† was able to bounce back and become spiritually whole again. And if the spirit is â€Å"whole,† the physical body will follow as well. Noah Levine went through hell and came out of it intact. If this were to be applied in international relations, one thing Buddhism can teach is violence and hatred is not the answer to the problems in the world. Buddhist teachings teach compassion and empathy and if nations would like to establish close relations with one another, they have to begin by establishing a spiritual connection which is first done by â€Å"letting go† of one’s self. Buddhism teaches that the reason why there is so much suffering in this world is due to worldly desires. In international relations, the struggle for power often puts nations at odds with one another and this often leads to wars. Buddhism teaches the opposite, in letting go of these desires and to empathize. In doing do, not only are friendly relations established, but one’s own interests will be met by others and one need not worry about it anymore. Finally, â€Å"Dharma Punx† is a very enlightening book which is highly recommended to anyone, not necessarily to those who went through the same ordeal as the author went. The author had been there and had done that yet he would not encourage anyone to go through it. Nevertheless, the book is very helpful for anyone who needs to be steered to the right direction of real happiness which is something no worldly goods can provide. How to cite Teaching Strategies, Papers

Friday, December 6, 2019

Thermal Aspects of the Refrigerated Vehicles Samples for Students

Question: Discuss about the Optimize Thermal Performance Of Refrigerated Vehicles In The Distribution Of Perishable Goods. Answer: Introduction The literature review has gone through a detailed research on the optimization of the thermal performances of the refrigerated vehicles which are required in the distribution process of a production unit. The perishable goods are always a matter of concern for the production department of an organization. However, the performance of the refrigerated vehicles can be measured with various mathematical and analytical models and the total quality control strategies need to be maintained in the systems of production (Pellicer et al, 2016). According to the studies of the production and inventory management, the temperature of the refrigerated products should be kept under control and the limits should be maintained in the production units (Novaes et al, 2015). This will ensure the optimum safety levels for the products and the product quality level will be enhanced. Along with that, the variation in the product temperatures along with the vehicles used in the production unit are presented by various non-linear functions (Techer et al 2014). In the traditional cargo distribution the vehicle optimization with the routing process is employed and the distribution problems of the vehicles are depended on) the Travelling Salesman procedures. The process of cargo unloading and the distribution influences the thermal aspects of the vehicles (Andreji?, Bojovi?Kilibarda, 2016). The thermal quality and other aspects are needed to be evaluated in the analysis of PCI (Process Capability Indices). However, the thermal aspects and the temperature does not vary with the time in a linear relation, thus a Simulated Annealing Algorithm is required for this purpose to get the solution in which the temperature can be maintained easily along with the travelling of the vehicles should be minimum in the production inventory (Benedito et al 2015). The production unit of an organization needs to ensure the quality of the production and the products along with the health safety levels by controlling the temperature all through the cold chain process. It is necessary to maintain the balancing situation over the refrigerated vehicles in the production floor. There are number of some factors which affect upholding of the eminence aspects and the perishability of the good during production (Kayansayan, Alptekin Ezan, 2014). The factors are such as the use of proscribed atmospheres throughout the cargo space or in the transit, the chemical treatments to control the physiological disorders and the heat treatments for that purpose. The packaging and handling systems influences the perishability of the foods items and the initial quality of the commodity also affects the perishability of those food items in the inventory. The temperature maintenance of the product during the distribution, storage and transit influences the perishabilit y too (Houdek et al 2014). However, the risk factors during the transit may influence the quality of these products and it may rapidly change in the storage and lead to quality losses. Thermal aspects of the refrigerated vehicles The thermal aspects of the refrigerated vehicles are controlled with the Process Control Indices and it serves the benchmarking elements to constitute the refrigerated transport systems. The use of PCIs ensure the minimum level of operating effectiveness by the system. The international ISO rules are compiled in the refrigerated freight transport (Kolda et al, 2014). There are many countries who have their specific rules regarding the refrigerated freight transport. Every country use to serve some specific legislations for the temperature control requirements for the inventory management of the production units in that country. The storage and the transport of perishable goods are taken care with some strict guidelines to the industrial aspects. However, the hygiene of the food products are major requirements in this process. Thus, the temperature maintenance should be adequately controlled and monitored. The Australian Government has put some regulation regarding this purpose. The regulation states that, the refrigerated vehicles need to have adequate cooling facility to equipoise the heat load permeated through the insulated body (Kinnear, Rose Rolfe, 2015). Along with that, it should have some extra capacity for the heat leakage purposes. The rules of the extra cooling capacity is states as a percentage of 25% (Dalk?l? et al 2015). However, the extra capacity can be stated to increase up to 200% for the trucks which have around 31 to 35 doors opening in a day. The reservation of the power depends on the time based deterioration of the insulation of the body of such vehicles along with the refrigeration plants. The heat of respiration during the transportation should produce the extra cooling capacity is there is a necessity to eliminate the deforestation heat (Laguerre, Hoang Flick, 2013).In some cases, it is seen that, the 6-9 years old refrigerated vehicles shows a increase in energy consumption along with CO2 emissions. Thus, the refrigeration equipments of the vehicles are required to the operated reliably. Analysis of the Thermal Performance The models that discourse the evaluation of the heat and the mass transference during the time of transport can be divided in that factors which regard as the atmosphere of the transport unit and concentrate on the temperature of the products. Some of the models combine such aspects top deal with transportation. However, the fluctuations in the ambient condition, door openings and the loading of the product also influence the maintenance of the temperature of the products which are transported. There are few other models too that specifies the effects of the transportation temperatures on the food safety parameters (Li, Hwang Radermacher, 2017). In a research, it is found that, the models of the fluid dynamics and the techniques of the analysis of airflow in cold environments are used for the purpose of the control on the temperatures of the foods and the management of the refrigerated vehicles. The main purpose of controlling the temperature is stated as to decrease the microbial growth and the increase in quality (Muratore et al, 2015). The studies on the refrigerated vehicles enlisted that, there are few conditions which should be adopted by various production and inventory units to limit the losses and falls in the quality of foods. In the short distanced transportation the refrigerated products are observed with more efficiency.In such cases the pre-established limits can be maintained easily and the quality controls can be implemented successfully. For this purposes, the focus should be given to the logistics application and the theoretical models can be employed to implement the dynamic nature of the TQM (Fikiin et al, 2017). The technical data should be allowed by the thermal laboratory tests and the in-the-field aspects of the behavioral characteristics should be considered in such situations. The accuracy in the data analysis for this purpose is needed to be given more preferences since the rigid technological and experimental controls are necessity for the maintenance of the refrigerated vehicles (Defraeye et al, 2016). In the context of the thermal performance there are various problems arise due to the mishandling and the misconducts of the time-temperature indicators. However, the situation can be overcome with the proper TTI (Time- Temperature Indicators) evaluations aligned with the cold chain process. According to the studies, one of the most systematic attempts in the prediction of the temperature of the refrigerated vehicles and the foods during the transit and multidrop is the CoolVan Research programme. It is a kind of software which is established by the Food Refrigeration and Process Engineering Research Centre at the University of Bristol, UK to implement the systematic distribution in the transportation of the refrigerated vehicles and the units. Process Capability Indices for the Assessment of the TTI data The Process Capability Indices (PCI) are the numerical elements which are used to compare the characteristics of a production. Values of such indices are equated with a large or small pre-established level along with the present requirements. The PCI are used in the statistical control of the control of the process quality and the productivity. However, the indices are convenient since it reduces the complexity of the information in a single value or number. The application of the PCI is related with the TTI values and the presentation is regarding the distribution of the data collected for the parameters of the temperature. Capability Indices According to studies, the capability indices are required to relate the process parameters to the engineering specifications. This relative aspects may include the bilateral tolerances and the target value may or may not be used for this purpose (Gowreesunker, Tassou Raeisi, 2014). Normal Data The capability indices are such dimensionless measures which can be easily understood for the purpose of quantifying the process quality in a production. During the application, the observed variable is temperature with x parameter inside the vehicle. Along with that, a distribution passage of frozen food products is used for the same purpose. The mean m and the standard deviation are also measurable parameters in this purpose. If there are two sided specification limits for the observed temperature parameter x, the four capability indices are used for this purpose namely Dp, Dpm, Dpk and the Dpmk (Chen Zhang, 2014). The definition of the Dpindex is as Dp = (USL LSL) / 6 The purpose of adopting the Dp index is to take control of the production process. The aim of the use is to make the index as larger as possible. The variable x is supposed to be normally distributed and the mean m is equalized to the specified targeted value xT. The coefficient of Dpis defined as the ratio of the tolerance spread and the actual spread of the process. There are few indication for the index which directs the calculation towards the perceived results of the process control (Aslam et al, 2013). If Dp 1, it indicates that the process does not meet the limits. If Dp 1, it indicates the fitted temperature variation in the indicated limits. If 1Dp 1.33, it indicates that there is some probability for the process to meet the limits. This situation need to be taken for serious attention in the process. If Dp33, it indicates that the process is fully accomplished. The six-sigma coverage here represents the data base with normal distribution along with the spread of 99.73%. Along with that, the Dp1.33 situation represents the eight sigma coverage and it practically covers the spread of 100% with in the similar circumstances. In some practical cases the process is not centralized with the targeted value xT. However, the drawbacks in the process can be avoided with the index Dpk that is defined as Dpk = min { Along with that, the Dpm can be used to consider the difference between the mean m and the target value xT. Dpm = However, the sample estimators can be used for the calculation of the above indices. Non-Normal Data There are few approximated methods for the evaluation purpose of the non0normal situations in the production process. The suggested methods for this purpose reflects the accurate numbers in the sample of the non-conforming items. Through these methods, the Process Capability Indices values can be adjusted according to the degree of skewness of the population taken in this purpose. The specific factors in the computation of the deviations and the mean may vary during the adjustments of the Process Capability Indices(Chen Zhang, 2014). However, these methods are grounded on the idea of dividing the into upper and the lover deviations such as U and L. The division can be represented with the dispersions of the upper and the lower sides around the value of the mean m respectively. The asymmetric probability density function F(x) should be approximated with the two formulae such as And Here, the same means are used but the standard deviation are different as 2Uand 2L. Along with that, the function G represents the standard normal pdfs with the upper and lower bounds. The upper and the lower bounds of F(x) are approximated with the functions F1(x) and the F2(x)respectively. The values of the standard deviations can be computed as U= Px and L = (1-Px) , where Px = Pr { x m} In the evaluation of the process control and the quality, the non-normal data can be calculated with the capability indices as similar with the normal data(Aslam et al, 2013). The formulae for the calculation of the indices are as follows Dp = min { Dp = min { = min { Setting Cx as equals to 1+ ?1 2Px ?, the above expression can be simplified as Dp =*(1/Cx) Here, the (1/Cx) is a corrective coefficient due to the skewness of the distribution of parameter x. Along with that, the value of the Dpk should be corrected for the skewness and this can be estimated as below The upper and the lower capability indices can be defines as DpkU = = .(1) DpkL = = . (2) Using the above two equation the PCI of the parameter of the temperature x can be formulated with the both sided specifications as Dpk =min {DpkU, DpkL} = min { (3) In the above equations 1 and 2, the 2Uand 2Lare used in the place of the standard deviation to reflect the degree of skewness in the distribution of the parameter x. The underlying distribution of x is symmetric and the value of the Px is equals to 0.5. However, the distribution is skewed then the value of the Dpkwill became smaller than the value of. The estimation of the values of the Dpand Dpk can be performed along with the calculation of the mean of the population, the standard deviation of the sample and the probability of the parameter x in this purpose. Let, the n values of the temperature parameter x be x1, x2, x3, x4, x5, x6 xn. The mean of the sample be msand the standard deviation of the sample be s. The probability of the parameter be P(x) which can be estimated with (number of observation ms). That is, P(x) msxi ), where the for x 0. Then the Dpk can be evaluated by the substitution of ms, s and P(x)for the m, and Pxin the equation 3. The fourth capability index Dpmkis used when the mean m departs from the targeted value of the parameter xT. In this application, there is target value only if there are the USL and the LSL used. Consequently the Dpkindex is adopted (Chen, Yang Chen, 2015). Conclusion In the production floor, the temperature of the food items largely determines the rate of the microbial activities which can be the cause of the spoilage of the most of the fresh food products. Along with that, lack of continuous monitoring of the temperature can hamper the distribution of the units. Such interruption during the transit and control can lead to the deterioration of the quality of products during the production process. The required product temperatures are needed to be maintained from the production to the consumptions stages. References Andreji?, M., Bojovi?, N., Kilibarda, M. (2016). A framework for measuring transport efficiency in distribution centers. Transport Policy, 45, 99-106. Aslam, M., Wu, C. W., Azam, M., Jun, C. H. (2013). Variable sampling inspection for resubmitted lots based on process capability index Cpk for normally distributed items. Applied Mathematical Modelling, 37(3), 667-675. Crcel, J. A., Benedito, J., Cambero, M. I., Cabeza, M. C., Ordez, J. A. (2015). Modeling and optimization of the E-beam treatment of chicken steaks and hamburgers, considering food safety, shelf-life, and sensory quality. Food and Bioproducts Processing, 96, 133-144. Chen, C. P., Zhang, C. Y. (2014). Data-intensive applications, challenges, techniques and technologies: A survey on Big Data. Information Sciences, 275, 314-347. Chen, K. S., Yang, S. L., Chen, H. T. (2015). Process improvement capability index with costA modeling method of mathematical programming. Applied Mathematical Modelling, 39(5), 1577-1586. Dalk?l?, A. S., Celen, A., ebi, A., Wongwises, S. (2016). Effect of Refrigerant Type and Insulation Thickness on Refrigeration Systems of Land and Sea Vehicles. Strojnikivestnik-Journal of Mechanical Engineering, 62(4), 252-259. Defraeye, T., Nicolai, B., Kirkman, W., Moore, S., van Niekerk, S., Verboven, P., Cronj, P. (2016). Integral performance evaluation of the fresh-produce cold chain: A case study for ambient loading of citrus in refrigerated containers. Postharvest Biology and Technology, 112, 1-13. Fikiin, K., Stankov, B., Evans, J., Maidment, G., Foster, A., Brown, T., ... Alvarez, G. (2017). Refrigerated warehouses as intelligent hubs to integrate renewable energy in industrial food refrigeration and to enhance power grid sustainability. Trends in Food Science Technology, 60, 96-103. Gowreesunker, B. L., Tassou, S. A., Raeisi, A. H. (2014). Numerical study of the thermal performance of well freezer cabinets. In Proceedings of the 3rd IIR International Conference on Sustainability and the Cold Chain, London. Houdek, P., Rajtmajer, V., Kolda, M., Kopecka, M., Hegar, M. (2014). U.S. Patent Application No. 14/268,239. Kayansayan, N., Alptekin, E., Ezan, M. A. (2014). Flow and thermal characteristics of airflow inside a refrigerated container. International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. Kinnear, S., Rose, A., Rolfe, J. (2015). Emissions reporting in the Australian road freight transport sector: is there a better method than the default option?.International Journal of Sustainable Transportation, 9(2), 93-102. Kolda, M., Kopecka, M., Hegar, M., Rajtmajer, V., Houdek, P., Forejt, L., Ghiraldi, A. (2014). U.S. Patent Application No. 14/888,652. Laguerre, O., Hoang, H. M., Flick, D. (2013). Experimental investigation and modelling in the food cold chain: Thermal and quality evolution. Trends in Food Science Technology, 29(2), 87-97. Li, G., Hwang, Y., Radermacher, R. (2017). Cold Thermal Energy Storage Materials and Applications Toward Sustainability. In Energy Solutions to Combat Global Warming (pp. 67-117). Springer International Publishing. Muratore, G., Restuccia, C., Licciardello, F., Lombardo, S., Pandino, G., Mauromicale, G. (2015). Effect of packaging film and antibrowning solution on quality maintenance of minimally processed globe artichoke heads. Innovative Food Science Emerging Technologies, 31, 97-104. Novaes, A. G., Lima Jr, O. F., Carvalho, C. C. D., Bez, E. T. (2015). Thermal performance of refrigerated vehicles in the distribution of perishable food.PesquisaOperacional,35(2), 251-284. Pellicer, E. L., Garca, J. B. A., Marn, V. M., Albesa, B. (2016). Procedure for Optimization of a Modular Set of Batteries in a High Autonomy Electric Vehicle Regarding Control, Maintenance and Performance. In Advanced Microsystems for Automotive Applications 2016 (pp. 239-251). Springer International Publishing. Techer, C., Baron, F., Delbrassinne, L., Belad, R., Brunet, N., Gillard, A., ...Andjelkovic, M. (2014). Global overview of the risk linked to the Bacillus cereus group in the egg product industry: identification of food safety and food spoilage markers. Journal of applied microbiology, 116(5), 1344-1358.

Friday, November 29, 2019

The Case of Palmetto Pharmaceuticals

Introduction When examining the case of Palmetto Pharmaceuticals and the decline in client patronage indicated by Andrew Lowerston, it becomes immediately apparent that the problem lies in the way in which sales representatives view the customer-client relations model.Advertising We will write a custom case study sample on The Case of Palmetto Pharmaceuticals specifically for you for only $16.05 $11/page Learn More While a primarily sales oriented approach does address the issue of selling products, it fails to sufficiently address the issue of maintaining a constant stream of customers. As such, a method of evaluation must be implemented which shows the sales representatives the impact of their current approach and how it adversely affects the company’s overall sales performance. Suggested Performance Appraisal Program In this particular case, the most appropriate appraisal system to address the issues discovered by Lowerston is to implement a 36 0 degree feedback system. Such a system works by having multiple avenues from where data on employee performance is collected, this comes in the form of employee performance data being collected from managers, coworkers, from the employees themselves and, most importantly, from customers and suppliers (Drew, 2009). Such a method would be an effective means of resolving the issue of the case since it enables customers to provide a certain level of feedback on the way in which they were treated by the company’s sales representatives. By comparing the performance input created by managers and other employees with that of the clients, the company will be able to show the sales representatives the impact of their actions vis-à  -vis the actual performance of the company (Drew, 2009). The advantage of this particular method is that while it will show sales representatives that they are complying with the sales metrics set by the company, it would also indicate that they are actual ly failing when it comes to the broader goals of the company in terms of maintaining a constant stream of consumer patronage for its products (Downs, 2012). As a result, this would necessitate a distinct change in performance on the part of the sales representatives wherein they would be more inclined towards developing long lasting relations with their clients rather than focus on a quick sale for the sake of meeting a metric. Unfortunately, the inherent problem with this particular method of appraisal is the fact that it takes a considerable period of time for an evaluation to be completed (Downs, 2012). For example, feedback forms need to be sent to managers, other employees and to customers at which point they have to be filled out and returned to the company. This can take a considerable amount of time and, in the case of some customers, the forms may not be entirely accurate. Not only that, in some cases the performance indicators that are filled out by managers and employees may not be entirely accurate as well and, as such, this places considerable doubt on the accuracy of this particular approach on performance evaluation.Advertising Looking for case study on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Conclusion Based on an analysis of the pros and cons of the 360 degree feedback system as well as its possible use in the case of Palmetto Pharmaceuticals, it can be stated that given the need of the company to evaluate its sales representatives based on the input of consumers, the 360 degree feedback system presents itself as the most viable option in this particular instance. While it may be true that there are some problems related to the time it takes to analyze the data and the issues regarding the overall accuracy of the information collected, such factors are relatively minor compared to the potential benefits accrued. Reference List Downs, L. J. (2012). Integrated talent managemen t: Building a Strategy One Block at a Time. T+D, 66(8), 42. Drew, G. (2009). A â€Å"360† degree view for individual leadership development. Journal Of  Management Development, 28(7), 581-592. This case study on The Case of Palmetto Pharmaceuticals was written and submitted by user Logan Chan to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Monday, November 25, 2019

Free Essays on Anorexia Vs. Bulimia

Anorexia Nervosa vs. Bulimia Nervosa In today’s society many people are affected by eating disorders and their deadly side effects. Two of the most common eating disorders, anorexia nervosa and bulimia nervosa, are often confused for one another because they each share many of the same qualities; however, each disorder has its own distinct behaviors that make it quite different from the other. Because each disorder is serious and can be deadly, it is important for people to understand each one individually in order to be able to distinguish each disorder from the other. In comparison, both eating disorders involve dangerous behaviors that the victims of the disorders believe to either aid in the loss of weight or prevent the gain of weight. The victims of both disorders generally have poor self-images and emotional stress that is often accompanied by feelings of guilt and depression. Another strong comparison to make between anorexia and bulimia is that psychologists have yet to find out if the causes of the disorders are from genetics, the environment, or a combination of both genetic and environmental factors. Most theories today conclude that both disorders stem from a combination of genetic factors, such as chemical imbalances in the hypothalamus or pituitary gland, and environmental factors, such as the value of slenderness and the rejection of obesity. Another strong comparison is that both disorders are found to be much more common among females than males. In contrast, the two eating disorders vary from each other in that each disorder has its own distinct practices and behaviors in which its victims partake. Practices for victims of anorexia nervosa include refusal to eat any kind of food and denial that their behaviors and unhealthy appearance are unusual. Practices for victims of bulimia nervosa differ in that the victims will binge on incredibly large and abnormal quantities of food and then purge, which is o... Free Essays on Anorexia Vs. Bulimia Free Essays on Anorexia Vs. Bulimia Anorexia Nervosa vs. Bulimia Nervosa In today’s society many people are affected by eating disorders and their deadly side effects. Two of the most common eating disorders, anorexia nervosa and bulimia nervosa, are often confused for one another because they each share many of the same qualities; however, each disorder has its own distinct behaviors that make it quite different from the other. Because each disorder is serious and can be deadly, it is important for people to understand each one individually in order to be able to distinguish each disorder from the other. In comparison, both eating disorders involve dangerous behaviors that the victims of the disorders believe to either aid in the loss of weight or prevent the gain of weight. The victims of both disorders generally have poor self-images and emotional stress that is often accompanied by feelings of guilt and depression. Another strong comparison to make between anorexia and bulimia is that psychologists have yet to find out if the causes of the disorders are from genetics, the environment, or a combination of both genetic and environmental factors. Most theories today conclude that both disorders stem from a combination of genetic factors, such as chemical imbalances in the hypothalamus or pituitary gland, and environmental factors, such as the value of slenderness and the rejection of obesity. Another strong comparison is that both disorders are found to be much more common among females than males. In contrast, the two eating disorders vary from each other in that each disorder has its own distinct practices and behaviors in which its victims partake. Practices for victims of anorexia nervosa include refusal to eat any kind of food and denial that their behaviors and unhealthy appearance are unusual. Practices for victims of bulimia nervosa differ in that the victims will binge on incredibly large and abnormal quantities of food and then purge, which is o...

Thursday, November 21, 2019

Research proposal Annotated Bibliography Example | Topics and Well Written Essays - 250 words

Research proposal - Annotated Bibliography Example Apple Inc has been able to capture this market through establishing a department whose role is to market the products through the social media. This source explains the benefits of social media marketing. According to this source, the customers are turning towards companies that are innovative and integrate their ideas in the production process. Besides marketing, social media provides a platform for the company to interact with the customers. According to this source, marketing of the high technological products has changed over times. Due to the dynamic nature of the devices, it has become important to identify a cheaper marketing strategy. This source is important in identifying the impact that social media has been having on the company sales. The tastes and preferences of the current market keep on changing. Different companies are setting up huge amounts of money to conduct research on different aspects that affect the consumption behavior of the market. This source will be significant in identifying other ways that social media can be used to enhance the performance of the company. Social media has improved the performance of the business by making it easy to contact the customers. This source will be significant in identifying how social social media has improved the communication process. Many of the people have focused on leadership of Apple Inc as being the key to success of the company. However, social media has been instrumental in boosting the performance of the business. In addition, it has enabled the company to reach customers who are located in different parts of the

Wednesday, November 20, 2019

Legal Elements of a Business Contract Coursework

Legal Elements of a Business Contract - Coursework Example Consideration is the third element in contracts and is denoted as a valuable item or cash, which is presented so as to make the contract more binding. For example, a seller may require a buyer to present the payments for goods if they are to be delivered. The payment is considered as a consideration in this case. However, the buyer does not need to buy the full amount. The consideration is only given if there is a promise made (Boundy 2010, p. 64). In addition, the law requires that both parties should have an intention of getting into a contract. They must exhibit the awareness that their agreement is to be bound by law. The contract must be made by people out of their free consent without any form of coercion, fraud, mistake, misrepresentation or undue influence. The individuals must be in their right capacity to make contracts. This refers to the soundness of mind, being of the right age as well as individuals not disqualified by law to make any contract. There must be a lawful object of the contract as well as the certainty of the contract. The law also considers the possibility of performance surrounding the lawful object which is the subject of the contract. If it is something that cannot happen, then the law cannot enforce such contracts. Some contracts require legal formalities in form of writing (Boundy 2010, p. 67). Bilateral contracts are made by two parties after the agreement of terms and conditions while unilateral contracts only involve one party who presents the terms as well as the offer. Unilateral contracts are commonly applied by individuals looking for lost items who offer rewards to individuals who find them. In unilateral contracts, only one person is bound by the law (Boundy 2010, p. 94).

Monday, November 18, 2019

Germany and Germans Essay Example | Topics and Well Written Essays - 750 words

Germany and Germans - Essay Example A major contributing factor to his rise was the use of printing press which was introduced in this time period. He published pamphlets like Christian Liberty, On the Freedom of a Christian Man and the Babylonian Captivity of the Church. However, his most famous publication was the â€Å"95 Theses†, published in 1517. The publication was against the abuse of papal authorities and use of indulgences to bail out of jail free. His publications spread quickly through Europe and in 1521 he was summoned to appear in front of an assembly of Holy Roman Empire known as â€Å"Diet of Worms†. He was declared an outlaw and hid till 1522. He continued his teachings and two year long Peasant War was based on his ideas and theories about the Catholic system. It was the first of the revolt that lead to the revolution in Christianity and the rise of Protestantism. Luther continued teaching and served as Dean in the University of Wittenberg till his death in 1546. David Cole interviewed Dr. Franciszek Piper in 1992 to raise questions about the Holocaust story which is the death of Jews by Adolf Hitler during his period as Chancellor of Germany till 1945. David Cole visited one of the biggest camps of the World War II at Auschwitz to find evidence of the gas chambers and alleged homicidal gassings. He filmed his visit of the camp in an hour long video and interviewed tour guides, supervisor and Dr. Franciszek who was the senior curator to confirm his findings that point towards the idea that the Holocaust was a made up story. David Cole presented evidence and logic that conveys the message that the Gas Chambers at Auschwitz were constructed after the war. The main chamber was examined and signs of structural changes were shown along with the tour guide and supervisor presenting different views as to the presence of â€Å"Holes† in the chamber; supposedly these were used for delivery